I am running Kaspersky Intersociety and my it say's very time that I downloaded the poscon app from my account that it contains malware.

I am running windows 11 64. It looks like the malware is trying to access my computers memory. As I had limited access to my using my desktop. 

Kaspersky  internet security had to do a privacy scan to clean my system.  It looks like a new type / unknow trojan has invected your down load system.

Regards,,

Francois 

I am running Kaspersky Intersociety and my it say's very time that I downloaded the poscon app from my account that it contains malware.

I am running windows 11 64. It looks like the malware is trying to access my computers memory. As I had limited access to my using my desktop. 

Kaspersky  internet security had to do a privacy scan to clean my system.  It looks like a new type / unknow trojan has invected your down load system.

Regards,,

Francois 

<div class=library-modal>, it's child div is width 0 height 0. There is no min-width or min-height set on it. It is supposed to hold your training welcome message <div class=modal-contant>. Can you set a min-width and min-height on modal content div so we can click things? ty!

I signed up for Poscon, but after activating my account the  website is unresponsive. I tried several different browsers but I can't access anything. 
Is there something I can do?

I think that'd really be something that'd set it apart, and maybe even allow for computerised ATC over places like the atlantic, where CPDLC is used quite a bit

I red on Discord that a new launcer version 1.1.2 is needed to be used in Xp12, but cant find a download anywhere ?

Jan

This is a sample entry for a runway number (RunwayNumber is mapped to a color):

"7" N28.32.32.338 W81.20.25.853 RunwayNumber

However, when I reload the sector file, nothing is displayed.  None of the labels are displayed even those with color mappings that work for other sections.  If I put that into the [FREETEXT] section using the FREETEXT format, it is displayed but I can't change the color because I don't think FREETEXT will allow you to assign a color.  

This is the FREETEXT entry for the same one, which displays fine but can't have the color set:

N28.32.32.338:W81.20.25.853:KORL Runway:7

So, my questions are:

1. Is the [LABELS] section in sct2 files supported by the Radar Client?
2. If not, are there any suggestions on how to get text with color to be displayed?

Thanks,

Craig
 

After I returned I cannot activate my flight plan anymore.

I am doing the same way I always did before.

I have noticed that all flights flying in poscon recently don't show the origin and destination like before.

Would be this issue general for all users?

[12:18:09] POSCON Pilot Client version 1.0.4
[12:18:09] Checking for changes to installed models...
[12:18:09] No changes found.
[12:18:09] Connected to simulator: KittyHawk (11.0.282174.999)
[12:18:09] Custom model matching rules loaded.
[12:26:43] Connecting to network...
[12:26:43] Connection state: Authorizing.
[12:26:44] Connection state: RentingAircraft.
[12:26:44] Connection state: Connecting.
[12:26:54] Connection state: Disconnected.
[12:26:54] You have been disconnected from POSCON, reason: Signing in timed out
[12:27:21] Connecting to network...
[12:27:21] Connection state: Authorizing.
[12:27:22] Connection state: RentingAircraft.
[12:27:22] Connection state: Connecting.
[12:27:22] Connection state: Connected.
[12:27:33] Voice error: Connection has been shutdown by transport. Error Code: 0x80410005
[14:35:01] Connection state: Disconnected.
[14:35:01] Disconnected from network.
[14:49:12] Connecting to network...
[14:49:12] Connection state: Authorizing.
[14:49:12] Connection state: RentingAircraft.
[14:49:13] Connection state: Connecting.
[14:49:13] Connection state: Connected.
[14:49:13] Voice error: Object reference not set to an instance of an object.
[16:15:04] Connection state: Authorizing.
[16:15:04] Connection state: RentingAircraft.
[16:15:05] Connection state: Connecting.
[16:15:16] Connection state: Disconnected.
[16:15:16] You have been disconnected from POSCON, reason: Signing in timed out
[16:15:25] Connecting to network...
[16:15:25] Connection state: Authorizing.
[16:15:25] Connection state: RentingAircraft.
[16:15:26] Connection state: Connecting.
[16:15:26] Connection state: Connected.
[16:15:26] Voice error: Object reference not set to an instance of an object.

you have been disconnected from Poscon- Reason - Please make sure Poscon Launcher is running.  I get this all the time.

Now do I need new updated software - or- how do I handle this problem to get connected.  Must be something simple.

When I go into the launcher it shows all programs associated with it are running

thanks,

Don

Me gustaria poder hacer practicas de comunicaciones para entrenar mi oido mientras hago vuelos, y tambin convivir con otros hispano parlantes.  Hasta ahora sin exito.

Ojala se pueda lograr algo.

unfortunately I couldn't start the Launcher, this is what's written in the log file:

2022-11-24 14:50:54.744 +01:00 [INF] POSCON.Launcher version 1.0.8 starting up
2022-11-24 14:51:33.282 +01:00 [ERR] Unhandled exception
System.InvalidOperationException: Collection was modified; enumeration operation may not execute.
   at Poscon.FlightNet.GameControllerCollection.뿫()
   at Poscon.FlightNet.GameControllerCollection.쀥(Object sender, DeviceListChangedEventArgs )
   at HidSharp.DeviceList.RaiseChanged()
   at HidSharp.Platform.Windows.WinHidManager.DeviceMonitorEventThread()
   at System.Threading.Thread.StartCallback()

Hints appreciated, I might have missed something stupid.

Cheers

Yoshi

I wasn't sure if this qualified as a feature request. But I thought a discussion would be useful for everyone...well at least me!

So Laminar Research have release X-Plane 12 beta this week. It looks really nice from what I saw in the demo. There are many bugs to fix though & it could be a while before the product  is stable.

With this release of XP12, which I will be moving to when it is stable, it will mean that I will stop with Microsoft Windows & move over to Linux.

So my question is if there are any plans for the POSCON client to support Linux (& Mac) platforms & the timeframe in which that might happen.

As I was thinking about this post, it also occurred to me that there is a client called Swift which is an open source client that runs on Windows, Linux & Mac. It connects to both MS & X-Plane flight simulators.

It also connects to the VATSIM network & a network called x-flightserver that is used for small group flying & with ATC.

Details about Swift are found here: https://swift-project.org/ & details about x-flightserver can be found here: https://x-flightserver.net/#

As Swift is open source, anyone can modify it to suit their own purpose.  Everything is found on Github. So, 1 of the possibilities is to use it to connect to the POSCON network instead of the POSCON client. It supports model matching & voice communication.

Also, it can run on a separate LAN PC if desired & connect to the simulator on another machine.

Thoughts?

As I'm not on DISCORD, I would be grateful if someone could ask folks there to contribute to this topic if they feel they've got something to say.

Thanks,

KSI

Olaf, a dutch member emailed me for participation at the FSweekend for a stand with POSCON, but I can not return at his email address, it gives an error.

Can you let hem know to contact me.

Best Regards,

Frans organizer FSweekend

I'm getting two errors when trying to install my simulators using launcher:

1) POSCON ERROR: Installation failed: A pasta não está vazia. (0x80070091)
This error occurs when I try to install X-Plane11 from Launcher

2) No supported flight simulator were detected! Please ensure you have FSX or Prepar3D installed correctly. POSCON Pilot Cliente will now exit.

I didn't get any error messages when installing FS2020. However, when trying to open Launcher with the simulator open I get this error.

Observations:

1) I'm using Windows 10 and I have Flywithlua properly installed on my X-Plane11

2) I am opening Launcher in admin mode

3) I've restarted my system to test and it didn't work either.

Can someone help me?

I'm attaching the errors so you can see