Andrew Heath

The certificate holder is authorized to conduct operations by using airplanes with the approved configuration and operations described in the following table: M/M/S ICAO Code Regulatory Compliance Operating Configuration En Route Condition of Flight Seats Demonstrated POSCON Pax Number Flt. Att. A-319-111 A319 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 138 145 3 A-319-112 A319 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 138 145 3 A-319-132 A319 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 138 145 3 A-320-214 A320 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 180 180 4 A-320-216 A320 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 180 180 4 A-330-203 A332 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 310 293 7 A-330-343E A333 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 283 335 6 A-330-343X A333 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 283 335 6 B-737-86J B738 commission regulation (EU) no. 216/2008 PAX IFR/VFR Day/Night 189 184 4 _______________________________________ 1. Issued by the Positive Control Network, Operations Department. 2. These Operations Specifications are approved by direction of the Director of Operations. Digitally signed by Mathieu Laflamme, Director of Operations [1] SUPPORT INFO: Submission Package Ops Spec A003 Airplane/Aircraft Authorization [2] EFFECTIVE DATE: 01/17/2022 [3] AMENDMENT #: N/A DATE: 2022.01.17 12:27Z 3. I herby accept and receive the Operations Specifications in this paragraph. Digitally signed by Chris Eibl, CEO [1] SUPPORT INFO: N/A DATE: 2022.01.17 12:27Z

Unless otherwise defined in these operations specifications, all words, phrases, definitions, and abbreviations have identical meanings to those used in Regulation (EU) No. 965/2012 - GM2 Annex I Definitions, as amended. Additionally, the definitions listed below are applicable to operations conducted in accordance with these operations specifications. This certificate holder has listed no additional terms. _______________________________________ 1. Issued by the Positive Control Network, Operations Department. 2. These Operations Specifications are approved by direction of the Director of Operations. Digitally signed by Mathieu Laflamme, Director of Operations [1] SUPPORT INFO: Submission Package Ops Spec A002 Definitions and Abbreviations [2] EFFECTIVE DATE: 01/17/2022 [3] AMENDMENT #: N/A DATE: 2022.01.17 11:50Z 3. I herby accept and receive the Operations Specifications in this paragraph. Digitally signed by Chris Eibl, CEO [1] SUPPORT INFO: N/A DATE: 2022.01.17 11:50Z

This is still a WIP. You can check it out though... hopefully it helps https://forums.poscon.net/docs/support/getting-started/first-flight/

We decided to go with the Trips System and points instead of tours and badges.

You need to have Software Tips turned ON in your FS2020 Assistance Options Open FS2020 settings Click on Assistance Options Click on NOTIFICATION to show all sub-menus Software Tips, ON You now will receive POSCON push notifications in your sim

This is known issue with Microsoft Flight Simulator 2020 and how it interacts with SimConnect (the API that feeds our software). Unfortunately, there is not much we can do about this issue until Microsoft/Asobo resolves the issue on their end with a patch. In order to verify that the error you are seeing is the same as the one described here, you must press Control + Shift + A and check the aircraft list to see if any aircraft are “Disabled”. If they are, then you have confirmed this bug. The only way to resolve it is to shutdown the FS2020 Pilot Client, restart, and reconnect to the network.

No, but it can be fixed! This is an issue with FSX/P3D and FPS. In order to see smooth fluid movements, you need lock to a frame rate that your machine can maintain consistently. To fix this: Go to Options > Graphics > Display > Target Frame Rate Set to whatever your system can handle (typically below 60 FPS). If you desire to leave it at unlimited, then you will continue to see shutters when in close proximity to other aircraft and operating at high speeds.

Go to your add-on aircraft folder and open up the ACF File using a text editor. Search for “ICAO” and you will locate the line: “P acf/_ICAO XXXX” where XXXX is the 4-character ICAO code for the aircraft. If the ICAO code is not valid or does not exist, make the appropriate changes and then save the file.

In order to prevent this, simply disable the conflicting plugin using the plugin manager in the X-Plane plugin menu. This is further explained in the X-Plane Pilot Client Manual under the section “Conflicting Clients”.

When our technical support team suspects you might have a network connectivity issues, we might ask you to run the program Wireshark which is free software available online. Here are the steps: Install Wireshark from https://www.wireshark.org/ Start Wireshark Select the network interface card connected to the Internet Start capturing Test voice several times Stop capturing Save the capture Send the capture file to support

The log files for our clients can be found in the following locations: X-Plane: Look for "log.txt" in the root directory of X-Plane (where the X-Plane.exe file is located). FSX/P3D/FS2020: In order to get the log for this client, you must press Control+Shift+C while the client is still running. Launcher: Look for log files in the ...AppData\Local\POSCON\Launcher folder. Make sure you grab the one for the right date, for example "log20210318.txt" corresponds to March 18th, 2021. Radar Client: Look for both "PositiveControlRadarClient_crash.dmp" and "PositiveControlRadarClient_crash_.txt" in your …AppData\Local\POSCON\Radar Client folder.

Incoming server and alert messages can be viewed from the Master Toolbar > Messages There are different filters that can be applied to incoming messages. You can access these filters by clicking the "FILTER" button in the top-left hand corner of the window. This will open the Message Filter View: Info Messages - General information to the user Error Messages - More severe messages, when something is wrong and needs the user's immediate attention. H = Hide S = Show A = Alert (box) P = Play (sound) User Operations - Messages that are related to any kind of user operations (e.g. target is not tracked by you, flight plan editing messages, not logged in when using SI command). Client State - Radar client state changes (e.g. logging in to the network, role changed, downloading info). Track Handling - Flight plan track related (e.g. handoff request, unghost approved, OnStartTrack, OnCorrelateTrack). FP Handling - Flight plan related (e.g. CancelFlightPlan, UpdateFlightPlan with route, OnFlightPlanActivate) CPDLC - Related to CPDLC (e.g. session terminated, CPDLC session start, all CPDLC messages). Voice - Related to voice (e.g. voice connection is ready, voice connection reset, voice disconnected). Server Response - Messages coming from server immediately after issuing any command. When the server detect that user operation is not valid. Server Error - When the general OnAsyncException is called from server side.

This error can be identified by the following error message: Navigate to the following directory on your PC: AppData\Local Locate the following text file: x-plane_install_11.txt Delete all entries except for the one that indicates the installation of X-Plane you plan to use. Save the modifications and restart everything.

1. Dashboard Icon: If you are on any other page than Dashboard, this button will return you to the dashboard. 2. Library Icon: This button will take you to the page that contains POSCON software. Software Category Name of Software Version Number Launch/Update Button. Will say "Launch" if the software is up-to-date and ready to be launched. Will say "Update" if the software requires updating. Will show the download icon if the software hasn't been downloaded (see #5). Clicking on the button will execute the the respective task. Download Icon Settings Icon. Clicking this opens the sub-menu (see #6 below). Settings Sub-Menu. "Changelog" will open your default web browser and load the changelog for the respective client. "Uninstall" will uninstall the software from your computer. If you see the following icon, it means that there is software in the Library that requires updating: 3. Live Map Icon: This button will open up your default web browser and load the POSCON Live Map, which will show the location of online pilots and air traffic control. 4. Support Icon: This button will bring you back here, to the Support Documents. 5. POSCON Logo: This button will open up your default web browser and load the POSCON HQ Dashboard. 6. Online Flights Pane: This section of the Launcher dashboard will show you the currently connected flights, including ghosted traffic. If you click on the pane, it will open up your default web browser and load the POSCON Live Map, which will show the location of online pilots and air traffic controllers. 7. Online ATC Pane: This section of the Launcher dashboard will show you the currently connected air traffic controllers. If you click on the pane, it will open up your default web browser and load the POSCON Live Map, which will show the location of online pilots and air traffic controllers. 8. Flight Plan: If you click on this pane, it will open up your default web browser and load the Flight Plan (FPL) form. Use this to file flight plans on the POSCON Network. 9. Voice Status Indicator: The Launcher Client also incorporates a new voice status icon located in the upper right-hand corner of application which gives users an indication of the microphone and the radio configuration. Here are the different states: You are not connected to POSCON (or the voice server) or your airplane radios are not powered (perhaps your avionics are turned off). Your radios are configured correctly, but you are not currently transmitting. You are transmitting and listening on a frequency. Your radios are set up to transmit, but not to listen. Same as above, but your push-to-talk button/key is pressed Your radios are set up to listen, but not to transmit. This can happen when you are in Ghost mode or if you don't have your radios configured to transmit on a frequency. Same as above, but your push-to-talk button/key is pressed In all cases, remember you can use the Pilot Client Web UI ("RADIOS" page) to get better insight into what is happening with the configuration of your radios. 10. Minimize Options: These two icons are used to minimize the Launcher Client. The horizonal dash minimizes the Launcher Client as you would normally expect. The "X" located in the top right-hand corner of the Launcher Client minimizes the Launcher Client to the system tray. A notification will remind you that the Launcher has not fully exited, but is instead running in the system tray. To exit the Launcher Client, you need right-click on the icon in the system tray. The following options appear: Disconnect: Will disconnect you from the POSCON Network if you are connected via any Pilot Client or Radar Client. Quit: Will shutdown the Launcher Client. 11. Notifications Icon: This will be where you can receive notifications from POSCON (not currently implemented). 12. Settings (Cog Wheel) Icon: This button will open up the Launcher Client settings. If you failed to set your push-to-talk (PTT) button or key, you will see the following on your settings cog wheel logo: To rectify the issue, simply click on the cog wheel logo and click on "Push-to-Talk Bindings" to set the button and/or key. You must have at least one set at all times. Here is what the settings menu looks like when opened: This is the current version of the Launcher Client. This is for beta testers only. Regular users will not see this option. Clicking this will open up a sub-menu that will allow you set multiple push-to-talk buttons. You can set multiple joystick buttons and/or you can set one keyboard key. See the section Install the Launcher Client for more details. These are your microphone settings. These are your speaker settings. These are your volume controls. 13. Profile Avatar: This image is the same image that you set in your profile on the POSCON HQ. When clicked, a sub-menu opens: Overview: Opens your default browser and loads your Profile Overview page. Stats: Opens your default browser and loads your Profile Stats page. Settings: Opens your default browser and loads your the Profile Settings page. Logout: Logs you out of POSCON and closes the Launcher. 14. News Pane: This section of the Launcher Dashboard shows the most recent POSCON news. If you click on one of the news items, it will link you to the respective article. 15. Follow Us (Social Media) Pane: This section contains links to our social media feeds. 16. Clock: This is the current time in Universal Coordinated Time (UTC), aka "Zulu" time.

A. These operations specifications are issued to vEWG, whose principal base of operation is located at: https://www.vewg.net/ The holder of these operations specifications is the holder of Operating Certificate Number EWGD-003 and shall hereafter be referred to as the certificate holder. In addition to the Positive Control Network's policies and standards, the certificate holder shall operate under the commission regulation (EU) no. 965/2012 issued and maintained by the European Union Aviation Safety Agency (EASA). The certificate holder is authorized to conduct: Flights according to commission regulation (EU) no. 965/2012 Annex IV The certificate holder shall conduct these kinds of operations in accordance with the specific authorizations, limitations, and procedures in these operations specifications and all appropriate annexes of EASA commission regulation (EU) no. 965/2012. The certificate holder is authorized to conduct operations using the following ICAO airline code(s) and radio telephony: EWG - "Eurowings" EWE - "Eurowings" OCN - "Ocean" B. The certificate holder is authorized to use only the business name which appears on the certificate to conduct the operations described in subparagraph A. C. The certificate holder is authorized to conduct flights under EASA commission regulation (EU) no. 965/2012 for crewmember training, maintenance tests, ferrying, re-positioning, and the carriage of company officials using the applicable authorizations in these operations specifications, without obtaining a Letter of Authorization, provided the flights are not conducted for the purposes of achieving POSCON Points or rank. _______________________________________ 1. Issued by the Positive Control Network, Operations Department. 2. These Operations Specifications are approved by direction of the Director of Operations. Digitally signed by Mathieu Laflamme, Director of Operations [1] SUPPORT INFO: Submission Package Ops Spec A001 Issuance and Applicability [2] EFFECTIVE DATE: 12/29/2021 [3] AMENDMENT #: 01/17/2022 DATE: 2021.12.29 20:35Z 3. I herby accept and receive the Operations Specifications in this paragraph. Digitally signed by Chris Eibl, CEO [1] SUPPORT INFO: N/A DATE: 2021.12.29 20:35Z

Download the POSCON Launcher Client. This software has three purposes: It is used to download and update client software, which is used to connect. It contains the voice software, which is used to talk to pilots and air traffic controllers. It keeps you authenticated. Because of the above purposes, the Launcher Client must remain running at all times. If the above link does not work or you need to get to the Launcher Client download again in the future, visit the POSCON HQ. You can either find the download in the "More Menu" and then click "Launcher Download" or the download icon in the top-right corner.

POSCON reserves the right to remove the POSCON Content Creator role at any time for any reason.

This section is for members returning to POSCON for the first time in a very long time (i.e. prior to December 2021). In order to ensure the you have the best experience possible with our software, it is good practice to do a clean installation before trying to install new software: Make sure all flight simulator platforms are not running. Go to Windows search bar and type the following: "Add or remove programs". Click on the suggestion and then in the "Search this list" text field under "Apps & features", type: "POSCON". Uninstall all results. Go to Windows search bar again and type "%localappdata%" and find all "POSCON" related directories and delete them. Go to Windows search bar and type "%appdata%"" and find all "POSCON" related directories and delete them. Next, download new software from this link https://launcher.poscon.net/latest Update clients to new version through the Launcher. NOTE: You may need to logout and back into the POSCON HQ website for other changes to take effect. Additionally, it may be a good idea to clear your web browser's cache.

Reserved.

Reserved.

POSCON does not require that a content creator maintain a certain average viewer count nor do we require a certain number of subscribers or followers for an affiliation. Instead, the Directors are looking for the following criteria in past broadcasts: Positive attitude Educating content Interactive content Activity on POSCON If you are interested in becoming a POSCON Content Creator, please send an email to [email protected] and include the following information: Name and POSCON User ID Type of content you produce Link to stream and past broadcasts you would like us to watch

POSCON Content Creators are not limited to only using POSCON for their choice of network, but they are required to demonstrate POSCON content to their followers/subscribers on their preferred platform at least once every 14 days. If unable to comply with this requirement for any reason, please inform the President and an exception can be made on a case-by-case basis. If streamer handles change, the Content Creator must update let POSCON staff know of the change so that we can update the profile.